Professional Multi Battery LED Hybrid work light 10050 MH (LED site light 100W, 12500lm, IP55, work light compatible with 18V batteries 11 different manufacturers, 5m RN cable, without battery, Engineered in Germany)

Description

Thanks to the brennenstuhl® Multi Battery 18V System, the extremely robust and bright Professional Multi Battery LED battery work light with 100W power is compatible with different 18V batteries (various Ah classes) from the eleven power tool manufacturers Bosch Professional, Dewalt, Einhell, Fein, Festool, Flex, Hikoki, Makita, Metabo CAS, Milwaukee and Würth. So no matter which battery system is already in use, the interface technology enables maximum flexibility and it is possible to fall back on the battery system of one's choice. The matching adapter can be inserted into the interface with just a flick of the wrist. Brennenstuhl is part of AMPShare - Powered by Bosch Professional. The AMPShare battery alliance enables the use of brennenstuhl® work lights with the 18V rechargeable batteries from Bosch Professional. LED construction light with 12500 lm offers optimum light distribution through large-area illumination with glare-free and impact-resistant working light. The impact-resistant construction spotlight can be used flexibly and as required, whether standing upright, lying flat for wide-area illumination or mounted on a tripod. The impact-resistant work spotlight with enormous luminosity can be controlled by battery and mains operation thanks to hybrid technology. Even in the event of a power failure, the LED spotlight ensures safety by automatically switching from mains to battery operation. Furthermore, it has a battery status display for the remaining energy of the batteries used (the batteries must be charged externally) and a protection system for Powertool batteries. This protects the batteries from deep discharge and overheating (caused by high load currents). In addition, the Multi Battery LED site light with hybrid technology convinces with the following features:

• With plug-in cable connection and 5m detachable cable (H07RN-F2X1.0)
• With on/off switch
• LED spotlight with anti-tilt protection, protects working light and housing of the spotlight
• With bright SMD LEDs
• Ergonomic handle
• Tripod mounting possible
• Light duration depends on the battery used:

• With 4 switching levels (100% - 75% - 50% - 25%), direct full power when switched on
• Power consumption: 100W
• Luminous flux: 12500lm
• Protection class: IP55
• When using 18V batteries of higher Ah classes without battery protection cover IP20
• Impact resistance: IK08
• Protection class: III
• Category 2 (K2) equipment: Use for harsh environments with high mechanical, physical and chemical impact

Interface technology

The brennenstuhl® Multi Battery 18V System makes it possible to use a work light with the already preferred battery system. The LED Hybrid work light 10050 MH is suitable for use with 11 outstanding Powertool 18V battery systems with just one handle. The interface between the work light and the battery are 10 adapters.

Lighting duration depending on the battery used

• approx. 0.8h/4Ah at 100% light intensity,
• approx. 1h/4Ah at 75% light intensity,
• approx. 1.6h/4Ah at 50% light intensity,
• approx. 3.2h/4Ah at 25% light intensity

Hybrid technology

Can be used in mains and battery mode

• detachable plug-in cable (5m H07RN-F2X1.0)
• with automatic switchover from mains to battery in the event of a power failure